PHYS 1106 Laboratory Rules


Abstract

                  1= Complete and excellent work, 0.5= Some errors or omissions, 0 = Very little correct or useful

Main report

4 = Complete and excellent work
3 = Satisfactory, but with some minor errors
2 = Significant errors or omissions
1 = Very little correct or useful work
0 = Missed lab

This is a brief summary of the experiment about to be performed. You should explain what data you will gather, the procedure for gathering the data, and the reason for gathering the data. You will need to carefully read and understand the lab manual to write the Abstract. You must do this ahead of time and submit it upon entering the lab. The graded abstract will be returned to you during the lab and forms part of your lab report.

recorded during the lab in pen with units and error estimates, arranged neatly on the page.

In this section, you will identify the source of the error and state the effect of the error on the analysis and the conclusion. Was the error random (statistical) or systematic? Was it caused by the equipment or by the use of the equipment? Propagate the errors in your data to any quantities calculated from your data.

This is a brief answer to the following question: "What did I learn from the experiment, from my data, and from my analysis?" You will not be required to prove the theory, in fact you must not even try to prove the theory. If the data that you collected and the subsequent error analysis do not support the physical theory, do not force it. The conclusion is very general.

Axes should be labeled, and the units should be given. For example, a plot of velocity(m/s) versus time(seconds).